The Technical Drawing TD Exam Questions for SS1, SS2 or SS3 all Term (First, Second and Third) are available at stcharlesedu.com
On this page we have uploaded a free copy of the Senior Secondary School SS1 First Term Technical Drawing Exam Questions.
Teacher and student can now have an idea on how the TD questions for SS1-3 look like.
Before a student is promoted into the next class, he/she is expected to pass the above subject.
Most Student do fail or perform below expectation, as a result of this, we have compiled Technical Drawing Test /Exam Questions for student preparing for test or examination.
The SS1, SS2 & SS3 exam questions served as a reference material and also help teacher to set test and exam question.
Table of Contents
Technical Drawing Multiple Choice Questions and Essay.
Is based on the Nerdc Curriculum.
Can be view and read on any Smart Phone
Can be Printed out into hard copy.
Can be obtain on Micro-Soft Word Format.
Can be Edited to suit your need.
The paid version has up to 60 Multiple Objective Questions to choose from
Out of Public Domain.
Available only to subscriber.
TD Exam Past Questions Papers Benefit
The Benefit of Using Our Senior Secondary School TD Exam Questions.
Teachers
As a teacher using our Multiple Exam Question source make teaching more interesting.
Reduce the workload.
You can modify the questions to suit your need.
You get best value for your money when you purchase from us.
Students
As a student it make you identify key areas to focus on.
Help you know your speed for the actual exam.
Give you confidence and make you relax on the deal day.
What Others are downloading
TD Scheme of Work
TD SS1-3 Exam Questions
TD SSCE Past Questions and Answers – WAEC, NECO, NABTEB
TD Lesson Note
How to Download Technical Drawing Multiple Choice Questions & Essay
Step to get Technical Drawing Exam Questions for SSS ( 1 – 3 )
COST PATTERN
Here is an example of our td exam questions for SS 1-3 cost pattern.
SS 2 TD 1st Term = N400
SS 2 TD 2nd Term = N400
SS 2 TD 3rd Term = N400
HOW TO PURCHASE
Take Action
Call or whatsapp us on 08051311885 for the account number to make payment;
And how to receive your complete copy of the past questions paper.
Mode of Payment.
Mobile Transfer, POS and Direct Bank Deposit.
After Payment
Send us the following:
Depositor Name.
Screenshot of either your Debit alert; Successful transaction notice or bank teller.
Name of Product Paid for; e.g Exam Questions on Technical Drawing for SS1
Valid Email Address;
Lastly Call or whatsapp us for your payment verification and confirmation.
DELIVERY ASSURANCE
We will deliver the past question to you 10 mins after confirmation of payment to the email address you send to us.
Download Free SS1 Technical Drawing Objective/Theory Questions for second term
Link 1 TD Exam Questions
Link 2 TD Exam Questions
SS1 First Term Technical Drawing Exam Questions
DURATION: 1 ½ HOURS
Answer all Questions in section A and three (3) in Section B
SECTION A: OBJECTIVE
TD Objective Questions for SS1 First Term
1. Freehand sketching involves the use of eraser … and………
(a) Pencil, paper
(b) Pencil, Scale
(c) Protractor ,divider
(d) Sharpener, compass
2. All these are sizes of a drawing board EXPECT………..
(a) A4 = 210mm * 297mm
(b) A2 = 470mm * 650mm
(c) A2 = 450mm * 650mm
(d) A0 = 840mm * 1189mm
3. …… is drawn at the bottom right hand corner of the drawing paper
(a) Information
(b) Title block
(c) Lettering
(d) dimensions
4. …… are used to draw vertical lines by placing one side of the triangle containing the right angle against the upper edge of the T-square
(a) Drawing board
(b)Set square
(c) Tee square
(d) Drawing paper
5. ………. is used to draw arcs and circles
(a) Pair of compass
(b) Set square
(c) Tee square
(d) Drawing paper
6. The diagram above shows (a) A perpendicular line (b) Angle 60 (c) parallel line (d) Vertical line
7. An acute angle is one which is less than………
(a) 600
(b)900
(c) 450
(d)350
8.The above diagram is………
(a) Concentric circles
(b) Eccentric circle
(c) normal
(d) Tangent
9. ………. are plane figures bounded by four straight lines
(a) Eccentric circle
(b) Circle
(c) Quadrilaterals
(d) Tangent
10. All these are the properties of a quadrilaterals EXPECT
(a) They have equal vertex
(b) It has all four sides equal
(c) all its angles are right angles
(d) the diagonals are equal and they bisect each other at the centre forming angle 900
11. ………. is the process of putting down information on a drawing by means of letters, words and numbers (a) Information (b) Title block (c) Lettering (d) dimensions
12. ………. are used for angular measurements.
( a) Pair of compass
(b) Set square
(c) Tee square
(d) Protractors
13. Which of the following instrument is used to transfer measurement from one point to another
(a) A pair of compasses (b) A pair of divider (c) Protractor (d) Set square
14 .A straight line is the shortest distance between …….. points
(a) 3
(b) 6
(c) 4
(d) 2
15. In the figure below, line AO is ……… to BC
(a) Adjacent
(b) perpendicular
(c) Opposite
(d) Parallel
16. We use………for setting paper on the drawing board
(a) Pencil
(b) Tee square
(c) Set square
(d) Compass
17. The drawing instrument used for measuring angles is………
(a) Compass
(b) ruler
(c) Protractor
(d) Set square
18. These are importance of technical drawing EXCEPT (a) It develop our skill (b) It help to interpret drawing (c)Means of communication (d) It gives us information about events
19. Pencil for lettering should be sharpen to……… point
(a) double
(b) Curve
(c) Conical
(d) fine
20. Drawing materials and instrument should be………
(a) Handle with care
(b) Handle roughly
(c) Kept in the roof
(d) Played with always
Want more Objective Questions like this?
Get the Complete Technical Drawing Exam Questions (Obj & Theory);
In editable Ms-word format for any of the SS 1 – 3 Classes from us
What Others are downloading Exam Questions for Senior Secondary School
Theory TD Questions for SS1
SECTION B (ESSAY)
1. (a) What is technical drawing?
(b) Mention 5 drawing instrument and material for good drawing practice
(c) Explain the following terms
i. Title block
ii. Lettering
iii. Safety
2. (a) Draw line AB 75mm and bisect it
(b) Construct a triangle given the length of the three sides as AB= 80mm BC=60mm AC=50mm
(c) Mention 3 parts of a circle
3. (a) Given that AC=36mm AB=55mm BC=36mm. Construct a triangle and circumscribe a circle
(b)List 3 properties of a square
(c)Construct a square ABCD with side AB=65mm
4. (a) Inscribe triangle ABC in a circle where PR=54mm RQ=63.5mm PQ=74.5mm
(b) Mention 4 types of triangles
(c) Mention 2 types of lines used in technical drawing
Want more THEORY Questions like this?
Get the Complete Technical Drawing Exam Questions (Obj & Theory);
In editable Ms-word format for any of the SS 1 – 3 Classes from us